LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2004 >> Canyon 2D Pickup, 2.8 8, RWD, Automatic >> Repair and Diagnosis >> Brakes >> Antilock Brake System And Traction Control System >> Repair Instructions >> Longitudinal Accelerometer Replacement >> Installation Procedure

Installation Procedure

  1. Install the sensor to the vehicle.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the 2 retaining nuts.

    Tighten:  Tighten the screws to 9 N.m (80 lb in).

    3. Fig 1: View Of Longitudinal Accelerometer
    GM1277052Courtesy of GENERAL MOTORS CORP.
  3. Install the electrical connector to the sensor.
    4. Fig 2: View Of Longitudinal Accelerometer Electrical Connector
    GM1277053Courtesy of GENERAL MOTORS CORP.
  4. Install the left split bench or bucket seat. Refer to Seat Replacement - Front Bucket or Seat Replacement - Split Bench in Seats.
scientia non olet · About LEMON Manuals