LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2004 >> Canyon 2D Pickup, 2.8 8, 4WD, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - 2.8L (Introduction) >> Repair Instructions >> Manifold Absolute Pressure (MAP) Sensor Replacement >> Installation Procedure

Installation Procedure

  1. Lightly lubricate the MAP sensor seal with clean engine oil, to aid in installation.
  2. Install the MAP sensor (2) into the intake manifold (3).
  3. Install the MAP sensor retainer (1).
    4. Fig 1: View Of MAP Sensor
    GM1352008Courtesy of GENERAL MOTORS CORP.
  4. Connect the MAP sensor electrical connector (3).
    5. Fig 2: Identifying Intake Manifold External Components
    GM1350689Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals