LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2004 >> Canyon 2D Pickup, 2.8 8, 4WD, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - 2.8L (Introduction) >> Repair Instructions >> Fuel Tank Replacement >> Disassembly Procedure

Disassembly Procedure

  1. Remove the fuel filter. Refer to Fuel Filter Replacement .
  2. Refer to Quick Connect Fitting(s) Service (Plastic Collar)  in order to disconnect the following from the fuel tank module (2):
    • The EVAP pipe (5)
    • The fuel return pipe (6)
    • The fuel feed pipe (7)
  3. Disconnect the EVAP pipes (3, 5) from the vent valve (4). Refer to Quick Connect Fitting(s) Service (Plastic Collar) .
  4. Disengage the following from the retaining clips (1):
    • The fuel return pipe (6)
    • The fuel feed pipe (7)
  5. Disengage the EVAP pipe (5) from the retaining features molded into the fuel tank.
  6. Remove the fuel tank module from the fuel tank. Refer to Fuel Tank Module Replacement .
    7. Fig 1: View Of Fuel Tank Module, Fuel Pipes, & EVAP Pipes
    GM1361716Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals