LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2004 >> Canyon 2D Pickup, 2.8 8, 4WD, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - 2.8L (Introduction) >> Repair Instructions >> Fuel Tank Pressure Sensor Replacement >> Installation Procedure

Installation Procedure

  1. Lightly lubricate the FTP sensor seal with clean engine oil.
  2. Press the FTP sensor fully into the fuel tank module.
    3. Fig 1: View Of FTP Sensor
    GM1361717Courtesy of GENERAL MOTORS CORP.
  3. Connect the electrical connector (2) to the FTP sensor (1).
    4. Fig 2: View Of Fuel Tank Pressure Sensor & Fuel Tank Module
    GM1361711Courtesy of GENERAL MOTORS CORP.
  4. Install the left pickup box wheelhouse liner. Refer to Pickup Box Wheelhouse Liner Replacement in Body Rear End.
  5. Lower the vehicle.
scientia non olet · About LEMON Manuals