LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2004 >> Canyon 2D Pickup, 2.8 8, 4WD, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - 2.8L (Introduction) >> Repair Instructions >> Fuel Level Sensor Replacement >> Removal Procedure

Removal Procedure

  1. Remove the fuel tank module. Refer to Fuel Tank Module Replacement .
  2. Disconnect the fuel level sensor electrical connector from the module.
    3. Fig 1: View Of Fuel Level Sensor Electrical Connector
    GM1361719Courtesy of GENERAL MOTORS CORP.
  3. Complete the following in order to remove the fuel level sensor from the module assembly:
    1. Disengage the locking tab from the sensor.
    2. Slide the sensor downward from the module.
    4. Fig 2: View Of Fuel Level Sensor
    GM1361720Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals