LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2004 >> Canyon 2D Pickup, 2.8 8, 4WD, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - 2.8L (Introduction) >> Repair Instructions >> Fuel Level Sensor Replacement >> Installation Procedure

Installation Procedure

  1. Complete the following in order to install the fuel level sensor to the module assembly:
    1. Align the edges of the sensor with the slots in the module.
    2. Slide the sensor into position, ensure the locking tab is fully engaged.
    2. Fig 1: View Of Fuel Level Sensor
    GM1361720Courtesy of GENERAL MOTORS CORP.
  2. Connect the fuel level sensor electrical connector to the module.
    3. Fig 2: View Of Fuel Level Sensor Electrical Connector
    GM1361719Courtesy of GENERAL MOTORS CORP.
  3. Install the fuel tank module. Refer to Fuel Tank Module Replacement .
scientia non olet · About LEMON Manuals