LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2004 >> Canyon 2D Pickup, 2.8 8, 4WD, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - 2.8L (Introduction) >> Repair Instructions >> Fuel Injector Replacement >> Removal Procedure

Removal Procedure

  1. Remove the fuel rail assembly. Refer to Fuel Rail Assembly Replacement .
  2. Disconnect the fuel injector harness connector from the fuel injector.
  3. Remove the fuel injector retainer clip.
  4. Pull the fuel injector from the fuel rail.
    5. Fig 1: View Of Fuel Injector
    GM1361731Courtesy of GENERAL MOTORS CORP.
  5. Discard the fuel injector retainer clip (1).
  6. Remove the fuel injector O-ring seals (2, 4) from both ends of the fuel injector (3)

    Discard the O-ring seals (2, 4).

    7. Fig 2: View Of Fuel Injector, Clip & O-Rings
    GM351185Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals