LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2004 >> Canyon 2D Pickup, 2.8 8, 4WD, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - 2.8L (Introduction) >> Repair Instructions >> Air Cleaner Assembly Replacement >> Removal Procedure

Removal Procedure

  1. Disconnect the electrical connector from the mass air flow (MAF)/intake air temperature (IAT) sensor.
    2. Fig 1: View Of MAF/IAT Sensor Electrical Connector
    GM1352006Courtesy of GENERAL MOTORS CORP.
  2. Loosen the clamp and disconnect the air cleaner outlet duct from the air cleaner assembly.
  3. Remove the 2 bolts (3) and nut (5) securing the air cleaner assembly to the wheel house (4).
  4. Remove the air cleaner assembly from the vehicle.
    5. Fig 2: View Of Air Cleaner Assembly
    GM1352017Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals