LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2004 >> Canyon 2D Pickup, 2.8 8, 4WD, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - 2.8L (Introduction) >> Repair Instructions >> Accelerator Pedal Position (APP) Sensor Replacement >> Removal Procedure

Removal Procedure

  1. Disconnect the accelerator pedal position (APP) sensor electrical connector.
  2. Remove the APP sensor nuts.
  3. Remove the APP sensor from the vehicle.
    4. Fig 1: View Of APP Sensor
    GM1352013Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals