Enabling Procedure
WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the key from the ignition.
- Connect the steering wheel module yellow 4-way connector (2) located left of the steering column near the knee bolster.
- Install the CPA (1) to the steering wheel module yellow 4-way connector (2).
- Install the SIR fuse to the fuse block.
- Staying well away from all air bags, turn ON the ignition, with the engine OFF.
- The AIR BAG indicator will flash 7 times.
- The AIR BAG indicator will then turn OFF.
- Perform the Diagnostic System Check - SIR if the AIR BAG indicator does not operate as described.