LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Jimmy 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> Accessories & Equipment >> Infotainment >> Entertainment System >> Repair Instructions >> Audio Control Replacement - Rear Seat >> Installation Procedure

Installation Procedure

  1. Install the rear seat audio control panel to the rear console trim panel by pressing the unit into place, ensuring the retaining tabs lock into place.
  2. Install the console wiring harness connector to the rear seat audio control panel.
  3. Install the rear console trim panel to the console by pressing the unit into place, ensuring the retaining tabs lock into place.
    Fig 1: Installing Console Wiring Harness Connector To Rear Seat Audio Control Panel
    G01476493Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  4. Install the rear console trim panel retaining screw.

    Tighten 

    Tighten the screw to 1.9 N.m (17 lb in).

  5. Install the negative battery cable.
    Fig 2: Rear Console Trim Panel Retaining Screw
    G01476494Courtesy of GENERAL MOTORS CORP.