LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Jimmy 2D Utility, Part Time, Standard >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat System >> Repair Instructions >> Seat Replacement - Bench >> Installation Procedure

Installation Procedure

  1. Guide the seat belts through the slots in the seat. Install the seat to the vehicle.
    NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  2. Install the seat mounting bolts.

    Tighten 

    Tighten the seat mounting bolts to 70 N.m (52 lb ft).

  3. Install the seat mounting nuts.

    Tighten 

    Tighten the seat mounting nuts to 45 N.m (33 lb ft).

  4. Connect the electrical connectors, if equipped.
  5. Install the seat adjuster trim covers. Refer to SEAT ADJUSTER TRACK COVER REPLACEMENT - Front (Power)  or SEAT ADJUSTER TRACK COVER REPLACEMENT - Front (Manual) .
  6. Connect the battery negative cable.
    Fig 1: Installing Seat (Bench) To Vehicle
    G01478002Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals