LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Jimmy 2D Utility, Part Time, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission Servicing >> Lubrication >> Draining & Refilling >> Refilling

Draining & Refilling: Refilling

  1. Coat the new filter seal with automatic transmission fluid.
  2. Install the new filter seal into the transmission case. Tap the seal into place using a suitable size socket.
  3. Install the new filter into the case.
  4. Install the oil pan and a new gasket.
  5. Install the oil pan bolts. Tighten the oil pan to transmission case bolts alternately and evenly to specification. See TORQUE SPECIFICATIONS .
  6. If previously removed, install the range selector cable bracket and bolts. Tighten the bolts to specification. See TORQUE SPECIFICATIONS .
  7. Apply a small amount of appropriate sealant to the threads of the oil pan drain plug, if equipped.
  8. Install the oil pan drain plug, if equipped. Tighten the oil pan drain plug to specification. See TORQUE SPECIFICATIONS .
  9. Lower the vehicle.
  10. Fill the transmission to the proper level with appropriate transmission fluid. See RECOMMENDED FLUIDS .
  11. Check the COLD fluid level reading for initial fill only.
  12. Inspect the oil pan gasket for leaks.
scientia non olet · About LEMON Manuals