LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Jimmy 2D Utility, Part Time, Automatic >> Repair and Diagnosis >> Steering >> Power Steering System >> Repair Instructions >> Power Steering Pump Flow Control Valve Replacement - Off Vehicle (P Series) >> Disassembly Procedure

Disassembly Procedure

  1. Drain the power steering fluid from the power steering pump.
  2. Remove the connector and fitting assembly (4).
  3. Remove the O-ring seal (3).
    Fig 1: Removing Connector & O-Ring Seal From Pump Housing (P Series)
    G01467177Courtesy of GENERAL MOTORS CORP.
  4. Remove the control valve assembly (3) and the flow control spring (2) from the pump housing assembly (1).
Fig 2: Removing Control Valve Assembly & Flow Control Spring From Pump Housing Assembly
G01467178Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals