LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Jimmy 2D Utility, Part Time, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 165 (Wiper System & Washer System) >> Repair Instructions >> Wipers/Washer Switch Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Electrical Connector To Wiring Harness
    GM70097Courtesy of GENERAL MOTORS CORP.
  1. Slide the wiper/washer switch into the steering column lock module until the upper and lower retaining clips snap into place.
  2. Connect the electrical connector into the wiring harness.
    3. Fig 2: Driver Knee Bolster Trim Panel At Steering Column Covers
    GM73209Courtesy of GENERAL MOTORS CORP.
  3. Install the upper (1) and the lower (3) steering column covers.
  4. Install the tilt wheel lever (4). Refer to Tilt Lever Replacement in Steering Wheel and Column.
  5. Install the driver knee bolster trim panel. Refer to Trim Panel Replacement - Knee Bolster in Instrument Panel, Gages and Console.
scientia non olet · About LEMON Manuals