Circuit Description
WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
The system relay is energized when the ignition is ON. The system relay supplies voltage to the solenoid valves and the pump motor. This voltage is referred to as the system voltage.
The electronic brake control module (EBCM) controls each solenoid valve by grounding the solenoid.
The EBCM controls the pump motor by grounding the control circuit. The pump serves 2 purposes:
- Transfers brake fluid from the brake calipers to the master cylinder reservoir during pressure decrease events.
- Transfers brake fluid from the master cylinder reservoir to the brake calipers during pressure increase events.