LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Jimmy 2D Utility, Part Time, Automatic >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> Exterior Trim >> Repair Instructions >> Retaining Plate Replacement -Rocker Panel (Xtreme) >> Tools Required >> Removal Procedure

Removal Procedure

  1. Raise the vehicle. Refer to LIFTING AND JACKING THE VEHICLE in General Information.
  2. Remove the rocker molding.
  3. Drill out the rivets using a 1/4 inch drill bit.
  4. Clean the anti-corrosion chemical using a suitable degreaser.
    Fig 1: Rocker Molding
    G01477384Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals