LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Jimmy 2D Utility, Part Time, Automatic >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Body Front End >> Repair Instructions >> Hood Latch Support Replacement >> Installation Procedure

Installation Procedure

NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  1. Install the bolts that retain the primary latch mounting bracket to the support bracket.

    Tighten 

    Tighten the primary latch mounting bracket to the support bracket bolts to 25 N.m (18 lb ft).

    Fig 1: Installing Primary Latch Mounting Bracket To Support Bracket Bolts
    G01477540Courtesy of GENERAL MOTORS CORP.
  2. Install the primary latch support bracket to the vehicle.
  3. Install the bolts that retain the primary latch support bracket to the radiator support.

    Tighten 

    Tighten the primary latch support bracket to the radiator support bolts to 25 N.m (18 lb ft).

  4. Install the primary hood latch assembly. Refer to HOOD LATCH REPLACEMENT - PRIMARY .
  5. Install the radiator grille. Refer to GRILLE REPLACEMENT (GMC) or GRILLE REPLACEMENT (CHEVROLET) in Exterior Trim.
  6. Close the hood.
    Fig 2: Installing Primary Hood Latch Support From Vehicle
    G01477541Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals