LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Envoy RWD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission Servicing >> Removal & Installation >> Extension Housing Assembly >> Installation

Extension Housing Assembly: Installation

  1. Install a new case extension "O" ring seal (3).
  2. Install the case extension (2).
  3. Install the case extension bolts (1). See Figure . Tighten the case extension bolts (1) to specification. See TORQUE SPECIFICATIONS  .
  4. Install the transmission mount.
  5. Install the drive shaft. See appropriate DRIVE SHAFTS & UNIVERSAL JOINTS article in DRIVELINE/AXLES.
  6. Remove the drain pan and the transmission jack.
  7. Lower the vehicle.
  8. Fill transmission with appropriate fluid to proper level. See LUBRICATION  .
scientia non olet · About LEMON Manuals