LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Envoy 4WD >> Repair and Diagnosis >> Body & Frame >> Windows >> Stationary Window System >> Repair Instructions >> Rearview Mirror Replacement >> Removal Procedure

Removal Procedure

  1. Use a flat-bladed tool in order to remove the wire connector (1) from the mirror (2), if equipped.
  2. Using a Torx® screwdriver, loosen the set screw that holds the mirror base to the windshield button.
    Fig 1: Removing Wire Connector From The Mirror
    G01641216Courtesy of GENERAL MOTORS CORP.
  3. Slide the mirror off of the support.
    Fig 2: Sliding Mirror Off Of Support
    G01641217Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals