LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2002 >> Yukon Base, 5.3 Z, RWD >> Repair and Diagnosis >> Suspension >> Front Suspension System >> Repair Instructions >> Stabilizer Shaft Link Replacement >> Installation Procedure

Installation Procedure

  1. Install the stabilizer shaft link insulators and spacers (2).
  2. Install the stabilizer shaft link bolts (3).
    CAUTION: Refer to FASTENER NOTICE .
  3. Install the stabilizer shaft nut (1) to the link bolt.

    Tighten 

    Tighten the nut to 10 N.m (81 lb in).

    4. Fig 1: Installing Stabilizer Shaft Link
    G01662677Courtesy of GENERAL MOTORS CORP.
  4. Remove the safety stands
  5. Lower the vehicle.
scientia non olet · About LEMON Manuals