LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2002 >> Sierra 1500 HD, 4WD >> Repair and Diagnosis >> Steering >> Steering Wheel And Steering Column >> Repair Instructions >> Electronic Column Lock Module Replacement (Floor Shift) >> Installation Procedure

Installation Procedure

  1. Install the electronic lock module (1) to the steering column housing.
  2. Install the electronic lock module (1) mounting screws (2).
  3. Install the ignition switch (2) to the electronic lock module (2).
  4. Install the ignition lock cylinder. Refer to Ignition Lock Cylinder Replacement - On Vehicle .
  5. Connect the Passlock electrical connector (1) from the lock module
  6. Rotate the key alarm switch connector to the electronic lock module.
  7. Snap the electric park lock (2) onto the electronic lock module (1).
  8. Connect the electric park lock (1) electrical connector (2).
  9. Install the following parts to the steering shaft:
    1. 9.1. The turn signal cancel cam (3)
    2. 9.2. The shaft lock shield (4)
  10. Install the J 23653-SIR  to the steering shaft and compress the shaft lock shield.
  11. Install the lock shield retainer to the steering column shaft.
  12. Remove the J 23653-SIR  from the steering column shaft.
  13. Install the SIR coil. Refer to SIR COIL ASSEMBLY .
  14. Enable the SIR system. Refer to DISABLING & ACTIVATING AIR BAG SYSTEM .
scientia non olet · About LEMON Manuals