LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2002 >> Sierra 1500 HD, 4WD >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System >> Repair Instructions >> Wheel Speed Sensor Replacement (2WD) >> Installation Procedure

Installation Procedure

  1. Install the WSS (5) into the hub/bearing assembly (4).
  2. Install the WSS mounting bolt. Tighten the WSS mounting bolt to 18 N.m (13 lb ft).
  3. Install the WSS cable mounting clip to the knuckle.
  4. Install the WSS cable mounting clip to the upper control arm.
  5. Install the WSS cable mounting clip to the frame attachment point.
  6. Connect the WSS cable electrical connector.
  7. Install the brake rotor (2).
  8. Install the tire and wheel.
  9. Perform the Diagnostic System Check - ABS .
scientia non olet · About LEMON Manuals