LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2002 >> Jimmy 4D Utility, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1577 (Lighting Systems) >> Repair Instructions >> Stop Lamp Switch Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 Oldsmobile Bravada, 2003 GMC Envoy XL, 2003 GMC Envoy, and 2003 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the pushrod retainer (3) from the brake pedal pin (4).
  2. Remove the stop lamp switch (1) and the pushrod (2) from the brake pedal pin (4).
  3. Disconnect the stoplamp switch (1) electrical connector.
  4. Remove the stoplamp switch from the vehicle.
    Fig 1: Disconnecting Stoplamp Switch Electrical Connector
    G01640469Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals