LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2002 >> Jimmy 2D Utility, Part Time, Standard >> Repair and Diagnosis >> Transmission >> Manual Trans >> Manual Transmission Servicing >> Removal & Installation >> Back-Up Light Switch >> Installation

Back-Up Light Switch: Installation

NOTE: The back-up light switch has pre-applied thread sealant on the threads.

Install the back-up light switch. Tighten the back-up light switch to specification. See TORQUE SPECIFICATIONS . Connect the back-up light switch harness connector. Lower the vehicle.

Fig 1: Removing & Installing Back-Up Light Switch (NV1500)
G00102994Courtesy of GENERAL MOTORS CORP.
Fig 2: Removing & Installing Back-Up Light Switch (NV3500)
G00102993Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals