Removal Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Bravada, 2002 GMC Envoy XL, 2002 GMC Envoy, and 2002 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.

Open the front door.
Remove the push pin retainers (2) from the front door sealing weatherstrip located at the base of the pillar.

Fig 1: Removing/Installing Weather-Strip Retainers
Courtesy of GENERAL MOTORS CORP.

Fig 2: View Of Front Door Sealing Weatherstrip

Courtesy of GENERAL MOTORS CORP.

Pull back the front door sealing weatherstrip (1) in order to expose the weatherstrip side retainer screws (2).

Fig 3: Identifying Windshield Reveal Molding Screws

Courtesy of GENERAL MOTORS CORP.

Remove the screws from the weatherstrip side retainer.
Remove the weatherstrip side retainer from the windshield pillar.