Removal Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Bravada, 2002 GMC Envoy XL, 2002 GMC Envoy, and 2002 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.

Fold and tumble the right rear seat to a cargo position.
Leaving the electrical connectors attached, remove the communication interface module from the vehicle communication interface module (VCIM) bracket. Refer to Communication Interface Module Replacement (TrailBlazer, Envoy, Bravada) or Communication Interface Module Replacement (TrailBlazer EXT, Envoy XL) in Interior Trim.
Using a flat bladed tool, release the retaining tab (1) on the VCIM bracket.

Fig 1: Identifying Retaining Tab On VCIM Bracket
Courtesy of GENERAL MOTORS CORP.
Slide the VCIM bracket rearward until the retaining tabs are released from the seat bracket.
Remove the VCIM bracket from vehicle.
Slide the VCIM bracket rearward until the retaining tabs are released from the seat bracket.

Fig 2: Positioning VCIM Bracket
Courtesy of GENERAL MOTORS CORP.
Remove the VCIM bracket from vehicle.