LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2002 >> Jimmy 2D Utility, Part Time, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1418 (Engine Control System - 4.2L (Introduction)) >> Repair Instructions >> Fuel Level Sensor Replacement >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Oldsmobile Bravada, 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 GMC Envoy, and 2004 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Fuel Tank Module
    GM734434Courtesy of GENERAL MOTORS CORP.
  1. Remove the fuel sender assembly. Refer to Fuel Sender Assembly Replacement .
  2. Disconnect the fuel pump electrical connector.
  3. Remove the retaining clip from the fuel level sensor connector.
  4. Disconnect the electrical connector from under the fuel sender cover.
  5. Remove the sensor retaining clip.
  6. Squeeze the locking tangs and remove the fuel level sensor (3).
scientia non olet · About LEMON Manuals