LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2002 >> Jimmy 2D Utility, Part Time, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1380 (Engine Cooling System) >> Repair Instructions >> Radiator Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Air Pump Outlet Pipe Hose And Bolts
    GM1260635Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Battery Disconnect Caution in Cautions and Notices.
  1. Disconnect the negative battery cable.
  2. Drain the cooling system. Refer to Draining and Filling Cooling System .
  3. Remove the radiator inlet hose. Refer to Radiator Hose Replacement - Inlet .
  4. Remove the radiator outlet hose. Refer to Radiator Hose Replacement - Outlet .
  5. Disconnect the transmission oil cooler lines.
  6. If equipped with an air pump:
    1. Disconnect the 2 hoses from the air pump outlet pipe (1).
    2. Remove the 2 bolts from the air pump outlet pipe (2).
    7. Fig 2: Reservoir Hose And Fan Motor Electrical Connector
    GM886414Courtesy of GENERAL MOTORS CORP.
  7. Disconnect the fan motor electrical connector.
  8. Disconnect the 2 fan motor electrical harness clamps from the fan shroud.
  9. Remove the 2 radiator mount bolts.
  10. Remove the radiator fan with the motor.
  11. Transfer all necessary components onto the replacement radiator.
scientia non olet · About LEMON Manuals