Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Removing/Installing Wiper/Washer Switch And Tab

Courtesy of GENERAL MOTORS CORP.

Install the wiper/washer switch (2) to the steering column. Secure the switch until the tab (1) locks.
Connect the wiper/washer switch electrical connector.

Fig 2: Identifying Upper Steering Column Components

Courtesy of GENERAL MOTORS CORP.

Install the steering column upper trim cover (7) to the vehicle.
Install the steering column lower trim cover (6) to the vehicle. Secure the trim cover with the 3 screws.
Enable the SIR System. Refer to SIR Disabling and Enabling Zone 3 in SIR.