LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2002 >> Jimmy 2D Utility, Part Time, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission Servicing >> Removal & Installation >> Pressure Regulator >> Installation

Pressure Regulator: Installation

  1. Install the pressure regulator valve (1). Install the pressure regulator isolator spring (3) and the pressure regulator valve spring (2). See Fig 2.
  2. Install the reverse boost valve (4) in the reverse boost valve sleeve (5). Install the reverse boost valve (4) and sleeve (5) in the oil pump cover. See Fig 2.
  3. Compress the reverse boost valve sleeve into the bore of the oil pump to expose the retaining ring slot.
  4. Install the reverse boost valve retaining ring, then slowly release tension on the reverse boost valve sleeve. See Fig 1. Install the transmission oil filter and pan. See DRAINING & REFILLING  under LUBRICATION.
  5. Lower the vehicle. Fill transmission with appropriate fluid to proper level. See LUBRICATION .
Fig 1: Installed View Of Pressure Regulator
G00056996Courtesy of GENERAL MOTORS CORP.
Fig 2: Exploded View Of Pressure Regulator
G00056997Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals