LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2002 >> Jimmy 2D Utility, Part Time, Automatic >> Repair and Diagnosis >> Steering >> Power Steering System >> Repair Instructions >> Power Steering Pump Flow Control Valve Replacement - Off Vehicle (P Series) >> Disassembly Procedure

Disassembly Procedure

  1. Drain the power steering fluid from the power steering pump.
  2. Remove the connector and fitting assembly (4).
  3. Remove the O-ring seal (3).
    Fig 1: Removing Connector/Fitting Assembly & O-Ring Seal (P Series)
    G01669857Courtesy of GENERAL MOTORS CORP.
  4. Remove the control valve assembly (3) and the flow control spring (2) from the pump housing assembly (1).
    Fig 2: Removing Control Valve Assembly & Flow Control Spring (P Series)
    G01669858Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals