Activating System (Astro & Safari)

Remove key from ignition switch. Ensure AIR BAG fuse is still removed from fuse block. Connect passenger air bag Yellow 2-pin connector. Install CPA clip. Install instrument panel extension. Connect driver air bag Yellow 2-pin connector. Install CPA clip. Install sound insulator panel.
Install AIR BAG fuse in fuse block. Staying away from both air bags, turn ignition switch to ON position. Ensure AIR BAG warning light flashes 7 times, and then turns off.

Fig 1: Locating Driver Air Bag Yellow 2-Pin Connector (Astro & Safari)

Courtesy of GENERAL MOTORS CORP.

Fig 2: Exploded View Of Instrument Panel Extension (Astro & Safari)

Courtesy of GENERAL MOTORS CORP.

Fig 3: Locating Passenger Air Bag Yellow 2-Pin Connector (Astro & Safari)

Courtesy of GENERAL MOTORS CORP.