LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2002 >> Jimmy 2D Utility, Part Time, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1589 (Cellular Communication System) >> Repair Instructions >> Navigation Control Processor Bracket Replacement (TrailBlazer EXT, Envoy XL) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Bravada, 2002 GMC Envoy XL, 2002 GMC Envoy, and 2002 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the VCIM bracket to the seat bracket.
    2. Fig 1: Positioning VCIM Bracket
    GM829604Courtesy of GENERAL MOTORS CORP.
  2. Slide the VCIM bracket forward until the retaining tabs become locked to the seat bracket.
  3. Ensure the retaining tab (1) on the VCIM bracket is properly seated.
    Fig 2: Identifying Retaining Tab On VCIM Bracket
    GM829602Courtesy of GENERAL MOTORS CORP.
  4. Install the communication interface module. Refer to Communication Interface Module Replacement (TrailBlazer, Envoy, Bravada)  or Communication Interface Module Replacement (TrailBlazer EXT, Envoy XL)  in Interior Trim.
  5. Position the right second row seat to a passenger position.
scientia non olet · About LEMON Manuals