LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2002 >> Jimmy 2D Utility, Part Time, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1509 (Antilock Brake System, Traction Control System & Stability Control System) >> Repair Instructions >> Brake Pressure Modulator Valve (BPMV) Bracket Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: EBCM Harness Connector & Bracket
    GM707000Courtesy of GENERAL MOTORS CORP.
  1. Turn the ignition switch to the OFF position.
  2. Loosen the two insulator nuts (1).
    3. IMPORTANT: Do not kink or bend the brake lines when moving the EBCM/BPMV assembly.
  3. Lift the EBCM/BPMV assembly out of the bracket and support.
  4. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
    5. Fig 2: Steering Gear Nut & BPMV Bracket
    GM692288Courtesy of GENERAL MOTORS CORP.
  5. Remove the two BPMV bracket bolts.
  6. Remove the steering gear nut and bolt.
  7. Remove the BPMV bracket.
scientia non olet · About LEMON Manuals