DTC P1381: Misfire Detected - No EBCM/Pcm Serial Data: Description

The Powertrain Control Module (PCM) detects engine misfire by detecting variations in crankshaft deceleration between firing strokes. For accurate detection of engine misfire, the PCM must distinguish between crankshaft deceleration caused by actual misfire and deceleration caused by rough road conditions. The anti-lock brake system (ABS) can detect if the vehicle is on a rough road based on wheel acceleration or deceleration data supplied by the wheel speed sensors. If the ABS detects rough road above a predetermined threshold, this information is sent to the PCM via serial data. The PCM can then take the rough road into account when calculating misfire. Even if the ABS is malfunctioning and cannot detect rough roads, the misfire diagnostic will continue to run. However, if a misfire Diagnostic Trouble Code (DTC) sets, this additional DTC also sets indicating that rough road data was not available during the misfire calculation due to a serial data malfunction.