Conditions For Running DTC

DTCs P0102, P0103, P0106, P0107, P0108, P0112, P0113, P0121, P0122, P0123, P0335, P0336, P0401, P0440, P0442, P0443, P0446, P0449, P1106, P1107, P1111, P1112, P1121, P1122, or P1441 are not set.
The engine is running.
The ignition 1 signal is between 11 volts and 18 volts.
The Throttle Position (TP) sensor angle is less than 95 percent.
The change in the TP sensor angle is less than 5 percent.
The MAP sensor is less than 80 kPa.
The change in the MAP sensor is less than 3 kPa.
The above conditions are met for 1.5 seconds.