Installation Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Bravada, 2002 GMC Envoy XL, 2002 GMC Envoy, and 2002 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Front Door Sealing Weatherstrip

Courtesy of GENERAL MOTORS CORP.

Install the weatherstrip side retainer (2) to the windshield pillar.

Fig 2: Identifying Windshield Reveal Molding Screws

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fasteners notice in CAUTIONS & NOTICES .

Install the screws to the weatherstrip side retainer.
Tighten: Tighten the screws to the weatherstrip side retainer to 2 N.m (18 lb in).

Fig 3: Removing/Installing Weather-Strip Retainers

Courtesy of GENERAL MOTORS CORP.

Install the push pin retainers (2) to the front door sealing weatherstrip located at the base of the pillar.
Close the door.