Installation Procedure
WARNING: This page is about a different car, the 2002 Oldsmobile Bravada, 2002 GMC Envoy XL, 2002 GMC Envoy, and 2002 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
- Slide the mirror onto the support.
- Install the set screw.
Tighten: Tighten the set screw to 2 N.m (18 lb in).
- Connect the electrical connector (1), if equipped.
NOTE:
Refer to Fastener Notice in CAUTIONS & NOTICES
.