LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2002 >> Jimmy 2D Utility, Automatic, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1710 (Theft Deterrent System) >> Repair Instructions >> LED Indicator Replacement - Vehicle Security System >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the security indicator lamp electrical connector to the security indicator lamp.
  2. Install the security indicator lamp (2) to the IP upper trim panel (1):
    1. 2.1. Insert the lamp.
    2. 2.2. Rotate the lamp clockwise approximately 1/4 turn.
    IMPORTANT: On vehicles equipped with head up display (HUD), install the 3 HUD retainers last. Push down from left to right.
  3. Align the locating pins and retainers with the slots in the IP. Push down and forward on the IP upper trim panel, locking the trim panel into place.
    Fig 1: Security Indicator Lamp
    G01616671Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals