LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2002 >> Jimmy 2D Utility, Automatic, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1574 (Power Seat System) >> Repair Instructions >> Memory Seat Switch Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Bravada, 2002 GMC Envoy XL, 2002 GMC Envoy, and 2002 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the memory seat switch to the lock and door lock and side window switch (1).
    Fig 1: Identifying Switch Panel Electrical Connector
    GM750778Courtesy of GENERAL MOTORS CORP.
  2. Connect the electrical connector (2) to the memory seat switch.
  3. Install the door lock and side window switch (1). Verify that the front retaining clips and the rear retaining clips are fully seated.
    Fig 2: Removing/Installing Door Lock & Side Window Switch - Driver
    GM690976Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals