LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2002 >> Jimmy 2D Utility, Automatic, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1409 (Lighting Systems) >> Repair Instructions >> Headlamp Switch Replacement >> Installation Procedure

Installation Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Oldsmobile Bravada, 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 GMC Envoy, and 2004 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Removing/Installing Headlamp Switch
    GM729433Courtesy of GENERAL MOTORS CORP.
  1. Position the headlamp switch near the access hole.
  2. Connect the electrical connectors to the headlamp switch.
  3. Fig 2: Locating Headlamp Switch Retaining Tabs
    GM729434Courtesy of GENERAL MOTORS CORP.
  4. Install the headlamp switch to the IP. Ensure that the retaining tabs are fully seated.
  5. Install the left IP access cover.