LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2002 >> Jimmy 2D Utility, Automatic, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1354 (Antilock Brake System) >> Repair Instructions >> Brake Modulator Assembly Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the electronic brake control module (EBCM) harness connector.
    2. Fig 1: Brake Modulator Assembly, Modulator Bracket And Bolts
    GM819496Courtesy of GENERAL MOTORS CORP.
  2. Remove the 6 brake pipes from the brake modulator assembly (1).
  3. Plug the brake pipes in order to prevent loss or contamination of brake fluid.
  4. Remove 2 bolts (2) from the brake pressure modulator bracket (3).
    5. Fig 2: Brake Modulator Nut
    GM819497Courtesy of GENERAL MOTORS CORP.
  5. Remove nut (1) and the brake pressure modulator assembly and bracket.
  6. Remove 3 nuts and the brake pressure modulator assembly from the bracket.
scientia non olet · About LEMON Manuals