LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2002 >> Jimmy 2D Utility, Automatic, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1323 (Cruise Control System) >> Repair Instructions >> Cruise Control Servo Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Cruise Control Servo Cover & Tabs
    GM844775Courtesy of GENERAL MOTORS CORP.
  1. Disengage the 2 tabs (2) on the cruise control cover (1)
  2. Remove the cruise control servo cover (1).
    3. Fig 2: Cruise Control Cable At Servo Lever
    GM844777Courtesy of GENERAL MOTORS CORP.
  3. Loosen the accelerator control cable locknuts (2).
  4. Remove the following components from the cruise control servo:
    • The cruise control servo cable bracket screw (5)
    • The cruise control servo cable (4)
    • The accelerator control cable (3)
    5. Fig 3: Disconnect Cruise Control Servo Electrical Connector
    GM844781Courtesy of GENERAL MOTORS CORP.
  5. Disconnect the cruise control servo electrical connector (3).
  6. Remove the following components from the vehicle:
    • The 2 cruise control servo mounting bolts (2)
    • The cruise control servo (1) with the bracket attached
scientia non olet · About LEMON Manuals