LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2002 >> Jimmy 2D Utility, Automatic, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1295 (Battery) >> Repair Instructions >> Battery Positive Fuse Block Cable Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the battery positive fuse block feed cable into the vehicle.
  2. Install the battery positive fuse block feed cable to the under hood fuse block.
  3. Install the battery positive fuse block feed cable to positive (+) battery cable. Secure with the nut (5).

    Tighten 

    Tighten the positive (+) battery cable-to-relay block 1 feed cable retaining nut to 9 N.m (78 lb in).

  4. Tape the loom to prevent dirt and moisture from entering the harness.
  5. Install the positive (+) battery cable harness loom to the harness retainers.
  6. Install the plastic insulator to the positive (+) battery cable.
  7. Install the battery to the vehicle. Refer to BATTERY REPLACEMENT   .
Fig 1: Installing Battery Positive Fuse Block Feed Cable To Under Hood Fuse Block
G01547112Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals