LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2002 >> Envoy RWD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Shift Interlock Systems >> Removal & Installation >> Floor Console >> Removal

Floor Console: Removal

  1. Block the wheels to prevent the vehicle from moving. Remove the rubber ash tray inserts and rubber mat from the console.
  2. Remove the floor shift knob. See FLOOR SHIFT KNOB  . Remove the center console shift lever bezel (Bravada only). Remove the console storage bin. See FLOOR CONSOLE STORAGE BIN  .
  3. Remove the center console retaining screws. Adjust the parking brake to the fully engaged position.
  4. Release the 2 forward trim extensions ears attached to the lower instrument panel (Bravada only). Slide the console rearward and raise the rear of the console in order to expose the electrical connectors.
  5. Disconnect the electrical connectors as necessary. Adjust the parking brake to approximately the halfway position. Remove the center console from the vehicle. See Figure .