LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2001 >> Yukon Base, 5.3 T, 4WD >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Seat Belt System >> Repair Instructions >> Seat Belt Retractor Replacement - Left Front >> Installation Procedure

Installation Procedure

  1. Position the seat belt retractor onto the seat.

    Line up the tab on the retractor to the tab on the seat frame.

    2. Fig 1: View Of Upper Anchor Bolt
    GM792224Courtesy of GENERAL MOTORS COMPANY
  2. Refer to Fastener Notice .

    Install the upper anchor bolt.

    Tighten 

    Tighten the bolt to 53 N.m (39 lb ft).

    3. Fig 2: Locating Retractor Tower Retaining Screw
    GM381472Courtesy of GENERAL MOTORS COMPANY
  3. Install the retractor tower cover.
  4. Install the retractor tower cover retaining screw.

    Tighten 

    Tighten the screw to 2 N.m (18 lb in).

    5. Fig 3: View Of Lower Seat Belt Retractor Bolt
    GM792223Courtesy of GENERAL MOTORS COMPANY
  5. Install the retractor.
  6. Install the retractor bolt.

    Tighten 

    Tighten the bolt to 53 N.m (39 lb ft).

  7. Install the rear cardboard panel retainers.
  8. Install the seat back cover and pad. Refer to Driver or Passenger Seat Back Cushion Cover and Pad Replacement .
  9. Move the seat to its original position.
scientia non olet · About LEMON Manuals