LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2001 >> Yukon Base, 5.3 T, 4WD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - 4.8L, 5.3L, And 6.0L - Repair Instructions >> Repair Instructions >> Camshaft Position Sensor Replacement >> Removal Procedure

Removal Procedure

IMPORTANT:

Clean the area around the camshaft position (CMP) sensor before removal in order to prevent debris from entering the engine.

    Fig 1: View Of Camshaft Position (CMP) Sensor & Bolt
    GM260128Courtesy of GENERAL MOTORS COMPANY
  1. Remove the engine sight shield, if required. Refer to Upper Intake Manifold Sight Shield Replacement (6.0 L w/RPOs Y91 and Z88) , Upper Intake Manifold Sight Shield Replacement (4.8 L, 5.3 L, and 6.0 L) in Engine Mechanical-4.8L, 5.3L, and 6.0L.
  2. Disconnect the CMP sensor electrical connector.
  3. Remove the CMP sensor bolt.
  4. Remove the CMP sensor.
scientia non olet · About LEMON Manuals