LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2001 >> Sierra 2500 HD, 2D Pickup, 6.6 1, 4WD, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - 6.6L - Repair Instructions >> Repair Instructions >> Fuel Temperature Sensor Replacement >> Removal Procedure

Removal Procedure

    Fig 1: Upper Intake Manifold Sight Shield
    GM658266Courtesy of GENERAL MOTORS COMPANY
  1. Remove the upper intake manifold sight shield using the following procedure:
    1. Remove the retaining bolt in the front of the shield.
    2. Lift up on the front of the shield.
    3. Lift the shield off the rear bracket.
  2. Remove the turbo outlet duct over the left valve cover.
  3. Remove the fuel temperature sensor harness connector.
  4. Remove the fuel temperature sensor from the fuel rail.
scientia non olet · About LEMON Manuals