LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2001 >> Sierra 2500 HD, 2D Pickup, 6.6 1, 4WD, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - 6.6L - Repair Instructions >> Repair Instructions >> Fuel Temperature Sensor Replacement >> Installation Procedure

Installation Procedure

  1. Refer to FASTENER NOTICE in Cautions and Notices.

    Install the fuel temperature sensor.

    Tighten 

    Tighten the fuel temperature sensor to 22 N.m (16 lb ft).

  2. Install the electrical connector to the sensor.
  3. Install the Turbo outlet duct.

    Tighten 

    Tighten the duct clamps to 6 N.m (53 lb in).

    4. Fig 1: Upper Intake Manifold Sight Shield
    GM658266Courtesy of GENERAL MOTORS COMPANY
  4. Install the upper intake manifold sight shield.
  5. Tighten 

    Tighten the upper intake manifold sight shield bolt to 9 N.m (80 lb in).

scientia non olet · About LEMON Manuals